Saguaro Steel

Extras

AISC Chart (needs Adobe Reader - get it here)- This file outlines the project and includes blanks to fill out the total bid price, proposed schedule and exclusion. This form was designed for use with larger contracts so, the language probably will need careful modification to suit smaller detailer/fabricator contracts. Users should feel free to use and modify this file as they see fit. This form should be contained to one 8.5x11 sheet after inserting your company name and minimum hourly rate. This form should be use in conjunction with the 'Subcontract Agreement' and 'Base Bid Letter' forms. Submitted by Bob Lucernoni with contributions from Steve Bell, Ty Shank, and the NISD. (source: http://steel-link.com/2002/downloads/contracts.cfm)

AutoCAD Calculator (needs Winzip - get it here) - FREE Calculator for AutoCAD (any formats of numbers). Results of calculations can be used directly for performing AutoCAD commands: move, copy and others. Options: copy and paste numbers (decimal or architectural formats) in AutoCAD MText or Text editor; write calculations in Protocol, add comments, copy and paste contents of Protocol in any Text editor (Word or Notepad); get distances from AutoCAD and use them in calculations. Download version for AutoCAD2004 from http://www.nyacad.com
Submitted or last updated on 8/3/03 by Alex Borodulin.
(source: http://steel-link.com/2002/downloads/other.cfm)

Base Bid Letter (needs MS Word Viewer - get it here) - This MS Word file is a one page letter for detailers to send to the customer providing reasons and additional explanation for the terms and conditions as included in the 'Subcontract Agreement' available above. This form was designed for use with larger contracts so, the language probably will need careful modification to suit smaller detailer/fabricator contracts. Users should feel free to use and modify this file as they see fit. This form should be contained to one 8.5x11 sheet after inserting your company name. This form should be use in conjunction with the 'Subcontract Agreement' and 'Project Base Bid Quote' forms.
Choose base3.doc for MS Word format or base3.txt for text format.
Submitted by Bob Lucernoni with contributions from Steve Bell, Ty Shank, and the NISD.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Bevel to Degree Conversion Chart (needs MS Excel Viewer - get it here)- A bevel to degree conversion chart in Excel format. Compliments of www.PrecisionDraftingllc.com
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Letter of Transmittal (needs MS Word Viewer - get it here) - A letter of transmittal in MS Word format.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Project Base Bid Quote (needs MS Word Viewer - get it here) - This file outlines the project and includes blanks to fill out the total bid price, proposed schedule and exclusion. This form was designed for use with larger contracts so, the language probably will need careful modification to suit smaller detailer/fabricator contracts. Users should feel free to use and modify this file as they see fit. This form should be contained to one 8.5x11 sheet after inserting your company name and minimum hourly rate. This form should be use in conjunction with the 'Subcontract Agreement' and 'Base Bid Letter' forms. Choose base1.doc for MS Word format or base1.txt for text format.
Submitted by Bob Lucernoni with contributions from Steve Bell, Ty Shank, and the NISD.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Project Proposal (needs MS Word Viewer - get it here) - This MS Word document is a standard proposal that can be used when bidding jobs. It outlines exactly what is included and what is excluded along with terms and conditions. It addresses payment terms, backcharges, revisions, incomplete design drawings, etc. All text in red should be replaced with your information. You should modify this file as needed. Please modify the wording in this document to suit your needs.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Quotation (needs MS Word Viewer - get it here) - Here's a pretty thorough quotation that covers all the "getting screwed" bases.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Request for Information (needs MS Word Viewer - get it here) - REQUEST FOR INFORMATION
Submitted or last updated on 3/19/02 by Robert Goncalves.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

RFITQ (needs MS Word Viewer - get it here) - Blank RFI sheet that is easy to modify, it's in Word2000 format.
Submitted or last updated on 12/22/01 by Tim Quinn.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Scale Conversion Chart (needs MS Excel Viewer - get it here) - A scale conversion chart in Excel format. Compliments of www.PrecisionDraftingllc.com
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Subcontract Agreement (needs MS Word Viewer - get it here) - This MS Word file is an agreement showing the terms and conditions between the detailing company and the fabricator. It outlines the payment schedule, standard exclusions and other provisions and is to be signed by both parties. This form was designed for use with larger contracts so, the language probably will need careful modification to suit smaller detailer/fabricator contracts. Users should feel free to use and modify this file as they see fit. This form should be contained to one 8.5x11 sheet after inserting your company name. This form should be use in conjunction with the 'Project Base Bid Quote' and 'Base Bid Letter' forms. Choose base2.doc for MS Word format or base2.txt for text format. Submitted by Bob Lucernoni with contributions from Steve Bell, Ty Shank, and the NISD.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Transmittal Letter (needs MS Word Viewer - get it here) - This MS Word document is a standard transmittal letter for sending along with drawing submittals. All text in red should be replaced with your information. Please feel free to modify this file as needed.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

Vulcraft Joist Forms (needs Winzip - get it here) - This is a set of Vulcraft forms in Excel format, these are from a handout by Vulcraft at a trade show. Submitted or last updated on 1/22/02 by Chris Bell.
(source: http://steel-link.com/2002/downloads/contracts.cfm)

*These 'extras' can also be found at the original author's websites, listed as 'source'.

Home : Projects : Careers : About Us : Contact : Links : Extras

*To properly view this site, you may need to enable ActiveX components in your browsers options.